ADAM Delta DRAM to SRAM Converter

Description

The Lundy Electronics ADAM Delta DRAM to SRAM Converter PCB mod uses modern, readily available components to replace original, obsolete DRAM. The added benefit of this mod is that it also removes the inefficient need of +12v and -5v required by the original DRAM. All the original DRAM, associated decoupling capacitors, and power inductors are completely removed from the system. The new SRAM Conversion PCB then installs where the original DRAM was located, and specific required pins are then soldered in place on the PCB. The Converter PCB only requires 27 total solder pins versus the original 162 total DRAM, associated decoupling capacitors, and inductor solder joints. Limit three per customer.

Note: This only fits standalone ADAM units and not EM#3 ADAM units.

What’s included:

• Populated DRAM to SRAM Conversion PCB

Tools required:

• Desoldering iron
• Soldering iron
• Multimeter if troubleshooting is needed

Documentation:

• Installation guide: https://lundyelectronics.com/shared-files/865
• Alternate installation guide for those uncomfortable with desoldering: https://lundyelectronics.com/shared-files/900