Stern Pinball TRON Spinning Disc LED Effect Mod Kit
$195.00 – $200.00
The Lundy Electronics TRON Spinning Disc LED Effect Mod Kit is designed to replace the existing factory lamps beneath the spinning disc mechanism and instead use an LED ring to produce creative lighting effects when the spinning disc is idle or moving. These effects include an orange “dual scan” when idle, blue clockwise “comet” spin, red counterclockwise “comet” spin, and no activity when general illumination is off.
The device will detect when the general illumination lights are on/off and will turn the LED ring effects on/off accordingly for consistent integration with original factory effects that turn general illumination off to showcase certain mode effects. Firmware has been changed to use a different idle effect and accelerates both red and blue spinning LED ring effects for a more pronounced look.
A custom Lundy Electronics Controller PCB integrates an Arduino NANO to all the necessary inputs, outputs, power connections, and associated circuitry needed to control the LED ring. This mod requires no soldering.
Includes the following:
- Controller PCB
- PCB power tap and six-pin wire tap motor direction sense combination wiring harness
- LED ring assembly with wiring harness and bracket
- General illumination alligator clip wiring harness
- Disc shim
- Lower ring mounting bracket
- Ring bracket mounting hardware
- Cable ties
- Adhesive tape
- Optional “Pro Power Harness” only required for TRON Pro model machines
Documentation:
- Installation guide: https://lundyelectronics.com/shared-files/952
Description
The Lundy Electronics TRON Spinning Disc LED Effect Mod Kit is designed to replace the existing factory lamps beneath the spinning disc mechanism and instead use an LED ring to produce creative lighting effects when the spinning disc is idle or moving. These effects include an orange “dual scan” when idle, blue clockwise “comet” spin, red counterclockwise “comet” spin, and no activity when general illumination is off.
The device will detect when the general illumination lights are on/off and will turn the LED ring effects on/off accordingly for consistent integration with original factory effects that turn general illumination off to showcase certain mode effects. Firmware has been changed to use a different idle effect and accelerates both red and blue spinning LED ring effects for a more pronounced look.
A custom Lundy Electronics Controller PCB integrates an Arduino NANO to all the necessary inputs, outputs, power connections, and associated circuitry needed to control the LED ring. This mod requires no soldering.
Includes the following:
- Controller PCB
- PCB power tap and six-pin wire tap motor direction sense combination wiring harness
- LED ring assembly with wiring harness and bracket
- General illumination alligator clip wiring harness
- Disc shim
- Lower ring mounting bracket
- Ring bracket mounting hardware
- Cable ties
- Adhesive tape
- Optional “Pro Power Harness” only required for TRON Pro model machines
Documentation:
- Installation guide: https://lundyelectronics.com/shared-files/952
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| TRON Pro model machine? | No – I have an LE, Yes – Include Pro Power Harness (+ $5) |
